<< return to Pixycam.com

Baud rate and raw data of Pixy

Pixy Software
#1

Hi,Why my Pixy raw data would produce the following changes when I used the infrared LED: USART baud rate is more low, the more data was collected by Pixy? And then I use the a red ball,USART baud rate change has no effect on the raw data of my Pixy.You can see the appendix.

And sometimes, I find the LED indicator lit white after power on , like burning firmware.
Thank you
Alice

#2

Hello,
If you are using the IR-Lock firmware, you should ask for support from IR-Lock. (We do not have the ability to support the IR-Lock firmware.)

Edward