<< return to Pixycam.com

How to exit the dfu mode?

Pixy Software
#1

Hi everybody,

I have been playing around with pixy and I want to learn how to upload firmware with other tools, not pixymon. I came accross LPCScrypt and I can successfully program the SPIFI with pixy_firmware.hex, but I am later not able to exit the DFU mode. If I unplug the USB cable and plug it again, pixy stays in DFU mode.

Any suggestions?

Best, Ales

#2

Just to make it more clear: probably i do not stay in DFU mode. In the first plug in when i hold down the button the flash light goes on and I am able to upload the pixy_firmware.hex with LPCScrypt since pixy is in DFU mode. But the flash light remains, when I replug the usb cable without pressing the button. And the pixy default program is not running.

#3

Hey Ales,

this question would be best asked on our firmware SDK group! Here’s the link: https://groups.google.com/forum/#!forum/pixy_firmware_sdk

Hope this helps!

Best,
Jesse

#4

Hi Jesse,

Thanks for your reply. I have sent request to join the group but my membership is still pending. Do you have the administrator rights to accept my request?

Best

#5

Unfortunately not, I will let our admin know tho!

Cheers,
J