i got original pixy code but i using pixy2. i try 2 week convert to pixy2 code and I looked at the examples in pixycam.com but i cant handle it. anyone help me ?
#include <Servo.h>
#include <Pixy.h>
Servo myservo; // create servo object to control a servo
Pixy pixy; // create pixy object for controlling the pixy camera
// function for testing the servo
void test_camera(){
myservo.write(0);
delay(1000);
myservo.write(90);
delay(1000);
myservo.write(180);
delay(1000);
myservo.write(90); // get the camera centered
}
void setup() {
//Serial.begin(9600); // initialize serial
myservo.attach(9); // attaches the servo on pin 9 to the servo object
test_camera(); // executing testing for the servo
pixy.init(); // initing the pixy camera
}
void loop() {
//variables
static int i = 0;
int j;
uint16_t blocks;
char buf[32];
int32_t xpos;
// grabing the blocks
blocks = pixy.getBlocks();
// If there are detect blocks
if (blocks)
{
i++;
// we are using 50FPS
if (i%50==0)
{
sprintf(buf, "Detected %d:\n", blocks);
for (j=0; j<blocks; j++)
{
sprintf(buf, " block %d: ", j);
//Serial.println((((pixy.blocks[j].x)/2)+10)-60); //print out to what position will the servo go
// this is used so the servo can't get stuck at minimum and maximum values
if(((((pixy.blocks[j].x)/2)+10)-60) > 180 || ((((pixy.blocks[j].x)/2)+10)-60) < 0 )
{
myservo.write(90); // if at min or max go to the middle
}
else{
// if there is no problem with min and max
myservo.write((((pixy.blocks[j].x)/2)+10)-60);
}
}
}
}
}