Pixy2 + mbot with pixy lib and pixy2 lib

[zhushunxian]

I get a pixy2 with mbot ,Pixy2 Connect mbot through i2c.interface ,it works under the pixy lib, ,but it cant use some function,such as “setLamp()”, So I use pixy2 lib but under the pixy2 lib , the Initialization failure. I get the return value through the serial port"Error,no response". The return value is “PIXY_RESULT_TIMEOUT -4” ,The pixy2 didnt work.
Thank you!

[zhushunxian]

I found the reason. I solved it. thank you.

[freed]

Great! If possible, could you post what you did to solve, in case other users are having the same problem?

Thanks,
Jesse

[zhushunxian]

It’s because I checked the pixy1.0 compatibility mode check box, so pixy1.0 works, but the pixy2 doesn’t work.