The LPC4330 seems to support a SDRAM I/F. Currently I see that some of the port pins mapped for SDRAM data/control are being used for the sensor. Is it possible (at-least in theory) to add SDRAM to the platform by moving the sensor to non SDRAM GPIOs. Board redesign will of course be required but do you see any other limitations?
This might enable interesting applications where one needs temporal correlation of sensors data to detect/track motion or background…low cost intelligent surveillance!
Hi Animesh,
I would say in theory this is possible, but I did not design the hardware so I’ll have to get confirmation on this. I don’t see anything in the datasheet that says otherwise.
Scott